Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Lipo Batteries

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
7 postsPage 1 of 1
7 postsPage 1 of 1

Lipo Batteries

Post by JavaRN » Tue May 04, 2010 1:17 pm

Post by JavaRN
Tue May 04, 2010 1:17 pm

I use lipos for my bioloid comprehensive kit - 900MaH 11.1v I've noiced that after two months usage, the battery life declined abrubtly. Up till two weeks ago they used to give me 20 - 30 mins (at first they used to give me 45 mins), but all of a sudden they are lasting only 10 mins or so. Is it normal that lipos last only 2 to 3 months. (I use them four or five times a week).
I use lipos for my bioloid comprehensive kit - 900MaH 11.1v I've noiced that after two months usage, the battery life declined abrubtly. Up till two weeks ago they used to give me 20 - 30 mins (at first they used to give me 45 mins), but all of a sudden they are lasting only 10 mins or so. Is it normal that lipos last only 2 to 3 months. (I use them four or five times a week).
F'dan il-passatemp ghandek bzonn zewg affarijiet - FLUS u HIN. Zewg affarijiet li huma skarsi hafna u li jien minnhom ghandi vera ftit!
JavaRN
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 282
Joined: Fri Mar 02, 2007 11:01 pm

Post by billyzelsnack » Tue May 04, 2010 2:47 pm

Post by billyzelsnack
Tue May 04, 2010 2:47 pm

What voltage do you let them discharge to?
What voltage do you let them discharge to?
billyzelsnack
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 618
Joined: Sat Dec 30, 2006 1:00 am

Post by FabinovX » Tue May 04, 2010 2:48 pm

Post by FabinovX
Tue May 04, 2010 2:48 pm

Well, i've a premium and out of the box, i could run it intensively about 10/15 min max.
i got it at the beginning of frebruary and i didn't notice any change from now.

i run it one or two times a week with the lipo because i always use the alim to program and experiment.
the premium lipo is 1000 mAh 11.1V

Cheers
FabinovX
Well, i've a premium and out of the box, i could run it intensively about 10/15 min max.
i got it at the beginning of frebruary and i didn't notice any change from now.

i run it one or two times a week with the lipo because i always use the alim to program and experiment.
the premium lipo is 1000 mAh 11.1V

Cheers
FabinovX
FabinovX
Savvy Roboteer
Savvy Roboteer
Posts: 74
Joined: Mon Feb 01, 2010 4:12 pm

Post by JavaRN » Tue May 04, 2010 3:18 pm

Post by JavaRN
Tue May 04, 2010 3:18 pm

To billyzelsnack

I recharge my lipos when the monitor starts to beep, roughly at 10.7V.
To billyzelsnack

I recharge my lipos when the monitor starts to beep, roughly at 10.7V.
F'dan il-passatemp ghandek bzonn zewg affarijiet - FLUS u HIN. Zewg affarijiet li huma skarsi hafna u li jien minnhom ghandi vera ftit!
JavaRN
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 282
Joined: Fri Mar 02, 2007 11:01 pm

Post by Tyberius » Tue May 04, 2010 4:52 pm

Post by Tyberius
Tue May 04, 2010 4:52 pm

JavaRN wrote:To billyzelsnack

I recharge my lipos when the monitor starts to beep, roughly at 10.7V.


Also depends on what type of LiPos you're using. Not all LiPos are created equal, most of my Tenergy brand batteries have 'died' within 6-9 months of light use, while my Thunder Power batteries keep on tickin'.
JavaRN wrote:To billyzelsnack

I recharge my lipos when the monitor starts to beep, roughly at 10.7V.


Also depends on what type of LiPos you're using. Not all LiPos are created equal, most of my Tenergy brand batteries have 'died' within 6-9 months of light use, while my Thunder Power batteries keep on tickin'.
Tyberius
Savvy Roboteer
Savvy Roboteer
Posts: 108
Joined: Tue Nov 27, 2007 6:57 pm

Post by JavaRN » Tue May 04, 2010 5:41 pm

Post by JavaRN
Tue May 04, 2010 5:41 pm

Thanks all. Something else. Do AX-12s change peformance in hot wheather? As recently in my country the whether turned hotter and the moves that use to be played perfectly are not working properly - sometimes times the robot falls backwards.
Thanks all. Something else. Do AX-12s change peformance in hot wheather? As recently in my country the whether turned hotter and the moves that use to be played perfectly are not working properly - sometimes times the robot falls backwards.
F'dan il-passatemp ghandek bzonn zewg affarijiet - FLUS u HIN. Zewg affarijiet li huma skarsi hafna u li jien minnhom ghandi vera ftit!
JavaRN
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 282
Joined: Fri Mar 02, 2007 11:01 pm

Post by billyzelsnack » Tue May 04, 2010 8:07 pm

Post by billyzelsnack
Tue May 04, 2010 8:07 pm

10.7 is probably a little low. What's the charge after you let it sit for a bit after running? Should be at 3.7 per cell for longevity. Also. It only takes a single over-[dis]charge to screw up a pack.

One of the nice things about this size of robots is that they really don't stress lipos when it comes to current draw, so as long as you don't over discharge or charge when they are hot/cold they should have a long life.

Personally I don't buy nice lipos anymore. A nice lipo can just randomly go bad/puff too, but it sure pisses you off more when it does! I go with whatever is cheap and getting good reviews at the time. I'd guess you can probably get a reasonable 900mah low C pack for $10 these days.
10.7 is probably a little low. What's the charge after you let it sit for a bit after running? Should be at 3.7 per cell for longevity. Also. It only takes a single over-[dis]charge to screw up a pack.

One of the nice things about this size of robots is that they really don't stress lipos when it comes to current draw, so as long as you don't over discharge or charge when they are hot/cold they should have a long life.

Personally I don't buy nice lipos anymore. A nice lipo can just randomly go bad/puff too, but it sure pisses you off more when it does! I go with whatever is cheap and getting good reviews at the time. I'd guess you can probably get a reasonable 900mah low C pack for $10 these days.
billyzelsnack
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 618
Joined: Sat Dec 30, 2006 1:00 am


7 postsPage 1 of 1
7 postsPage 1 of 1