Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Fight Video Under 2KG

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
5 postsPage 1 of 1
5 postsPage 1 of 1

Fight Video Under 2KG

Post by UncleBob » Tue May 25, 2010 2:46 pm

Post by UncleBob
Tue May 25, 2010 2:46 pm

phpBB [media]


phpBB [media]


phpBB [media]


phpBB [media]


phpBB [media]


phpBB [media]
phpBB [media]


phpBB [media]


phpBB [media]


phpBB [media]


phpBB [media]


phpBB [media]
UncleBob
Savvy Roboteer
Savvy Roboteer
Posts: 398
Joined: Sun Dec 27, 2009 5:25 am

Post by 27Loco » Tue May 25, 2010 10:54 pm

Post by 27Loco
Tue May 25, 2010 10:54 pm

Thanks for uploading.

The Bioloids in this fights look great but somehow they where not strong enough to push the opponent down. Except for the bioloid in the third video. Maybe with some different movements he had a better chance.

The AX-18F will be a game changer :)
Thanks for uploading.

The Bioloids in this fights look great but somehow they where not strong enough to push the opponent down. Except for the bioloid in the third video. Maybe with some different movements he had a better chance.

The AX-18F will be a game changer :)
27Loco
Savvy Roboteer
Savvy Roboteer
Posts: 63
Joined: Sat Feb 20, 2010 10:16 pm

Post by UncleBob » Wed May 26, 2010 4:37 am

Post by UncleBob
Wed May 26, 2010 4:37 am

The bioloid can be improve by putting battery on its foot. Lower the controller. Make the legs servos stronger so that it does not wobble as much. Remove the front shield to lower the weight and CG.
The bioloid can be improve by putting battery on its foot. Lower the controller. Make the legs servos stronger so that it does not wobble as much. Remove the front shield to lower the weight and CG.
UncleBob
Savvy Roboteer
Savvy Roboteer
Posts: 398
Joined: Sun Dec 27, 2009 5:25 am

Post by Tyberius » Wed May 26, 2010 6:36 am

Post by Tyberius
Wed May 26, 2010 6:36 am

UncleBob wrote:The bioloid can be improve by putting battery on its foot. Lower the controller. Make the legs servos stronger so that it does not wobble as much. Remove the front shield to lower the weight and CG.


Unfortunately KRGF officials seem to frown upon batteries in the feet. They gave me a good amount of hassle about Giger's configuration, and I use the lightest batteries money can buy which really don't even effect COG any more than an additional EX-106+ would.
UncleBob wrote:The bioloid can be improve by putting battery on its foot. Lower the controller. Make the legs servos stronger so that it does not wobble as much. Remove the front shield to lower the weight and CG.


Unfortunately KRGF officials seem to frown upon batteries in the feet. They gave me a good amount of hassle about Giger's configuration, and I use the lightest batteries money can buy which really don't even effect COG any more than an additional EX-106+ would.
Tyberius
Savvy Roboteer
Savvy Roboteer
Posts: 108
Joined: Tue Nov 27, 2007 6:57 pm

ignore

Post by UncleBob » Wed May 26, 2010 6:39 am

Post by UncleBob
Wed May 26, 2010 6:39 am

i think one could have simply register without doing the inspection thing.

Most of the robots has oversize foot, knee angle 45degree which gave them a big advantage.
i think one could have simply register without doing the inspection thing.

Most of the robots has oversize foot, knee angle 45degree which gave them a big advantage.
UncleBob
Savvy Roboteer
Savvy Roboteer
Posts: 398
Joined: Sun Dec 27, 2009 5:25 am


5 postsPage 1 of 1
5 postsPage 1 of 1