Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Bioloid Comprehensive to PREMIUM RoboSavvy Upgrade Pack

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
1 postPage 1 of 1
1 postPage 1 of 1

Bioloid Comprehensive to PREMIUM RoboSavvy Upgrade Pack

Post by robosavvy » Wed Jan 05, 2011 6:20 pm

Post by robosavvy
Wed Jan 05, 2011 6:20 pm

Hi all

We're happy to announce that we now have a Video Available for the our Upgrade Pack from Comprehensive to PREMIUM.

phpBB [media]


This is not the official Robotis Comprehensive to PREMIUM Upgrade Pack (it's our own RoboSavvy pack). To keep the cost low we include the most significant innovations only: the LiPo battery + LiPo charger, the new CM 510 that includes External A/D ports for sensors and twice the memory (ATMEGA2561) to unleash the full power of Roboplus. Finally a set of Sensor Cables is included for you to attach your own sensors to the A/D ports (any 0-5V Analog sensor should will work).

FYI The Robotis GS-S12 Gyro Sensor (2 axis Gyro) used in the PREMIUM Kit for walk stabilization is also compatible with this upgrade, since upgraded now robots use the same microcontroller.


The pack is available here http://robosavvy.com/store/product_info ... ts_id/1244
It sells for ~100 GBP inc VAT (a fraction of the original Comprehensive to PREMIUM Upgrade Kit)

Regards
RoboSavvy
Hi all

We're happy to announce that we now have a Video Available for the our Upgrade Pack from Comprehensive to PREMIUM.

phpBB [media]


This is not the official Robotis Comprehensive to PREMIUM Upgrade Pack (it's our own RoboSavvy pack). To keep the cost low we include the most significant innovations only: the LiPo battery + LiPo charger, the new CM 510 that includes External A/D ports for sensors and twice the memory (ATMEGA2561) to unleash the full power of Roboplus. Finally a set of Sensor Cables is included for you to attach your own sensors to the A/D ports (any 0-5V Analog sensor should will work).

FYI The Robotis GS-S12 Gyro Sensor (2 axis Gyro) used in the PREMIUM Kit for walk stabilization is also compatible with this upgrade, since upgraded now robots use the same microcontroller.


The pack is available here http://robosavvy.com/store/product_info ... ts_id/1244
It sells for ~100 GBP inc VAT (a fraction of the original Comprehensive to PREMIUM Upgrade Kit)

Regards
RoboSavvy
robosavvy
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 157
Joined: Thu Oct 14, 2004 1:00 am

1 postPage 1 of 1
1 postPage 1 of 1