Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

CM-510 ZigBee connection problem

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1

CM-510 ZigBee connection problem

Post by Meteofun » Fri Jan 06, 2012 4:36 pm

Post by Meteofun
Fri Jan 06, 2012 4:36 pm

I have "Bioloid Premium Robot Kit". I have problem with wireless connection between RC-100(Zigbee-100) and Zigbee-110.

test configuration:
-One AX-12A(#6)
-CM-510
-Zigbee-110
-RC-100 with Zigbee-100
-battery

I downloaded the"test #1" and pressed PLAY button. LED on the Zigbee-110 stopped blinking. After that I pressed "U button" on RC-100 and nothing happend.
I tried with and without serial cable connected. I turned it off.

Image

I powered on cm-510. I downloaded the "test #2" and received answer. Is it correct ?

Image
Image
I have "Bioloid Premium Robot Kit". I have problem with wireless connection between RC-100(Zigbee-100) and Zigbee-110.

test configuration:
-One AX-12A(#6)
-CM-510
-Zigbee-110
-RC-100 with Zigbee-100
-battery

I downloaded the"test #1" and pressed PLAY button. LED on the Zigbee-110 stopped blinking. After that I pressed "U button" on RC-100 and nothing happend.
I tried with and without serial cable connected. I turned it off.

Image

I powered on cm-510. I downloaded the "test #2" and received answer. Is it correct ?

Image
Image
Meteofun
Newbie
Newbie
Posts: 2
Joined: Fri Jan 06, 2012 3:54 pm
Top

Post by Meteofun » Thu Jan 12, 2012 6:25 pm

Post by Meteofun
Thu Jan 12, 2012 6:25 pm

Anybody could help me ?
Anybody could help me ?
Meteofun
Newbie
Newbie
Posts: 2
Joined: Fri Jan 06, 2012 3:54 pm
Top

2 posts • Page 1 of 1
Post a reply
2 posts • Page 1 of 1
Return to Bioloid & Robotis