Burnt ax-12+ symptom?
Burnt ax-12+ symptom?
by wiweet
Sat Jan 07, 2012 8:28 am
Is smelly AX-12+ is a certain symptom for burnt ax-12+?recently I found my premium bot ax-12+ ID 1 smell like something burned after it fell down with its right hand slammed the floor when doing some dance routine from robotis.
by Fritzoid
Mon Jan 09, 2012 2:17 pm
Burnt parts are never good... does the servo still run?
A fall or hard slam to a solid surface can easily damage a servo (voice of experience talking here). Sharp stresses often cause teeth to be cracked or lost on the final output gear. The broken parts can easily jam the drive train and cause excess friction and overloading.
Try turning the servo slowly by hand to see if it moves smoothly throughout its range. If you can feel a problem area then replace the unit.
A fall or hard slam to a solid surface can easily damage a servo (voice of experience talking here). Sharp stresses often cause teeth to be cracked or lost on the final output gear. The broken parts can easily jam the drive train and cause excess friction and overloading.
Try turning the servo slowly by hand to see if it moves smoothly throughout its range. If you can feel a problem area then replace the unit.
