Legacy Forum: Preserving Nearly 20 Years of Community History - A Time Capsule of Discussions, Memories, and Shared Experiences.

Use RC-100 with IR and CM-510

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
4 posts • Page 1 of 1
Post a reply
4 posts • Page 1 of 1

Use RC-100 with IR and CM-510

Post by ctlc2 » Sat Aug 18, 2012 7:57 am

Post by ctlc2
Sat Aug 18, 2012 7:57 am

Hi,
Il am a beginner un robotic...
Here is my problem:
I try to use the RC-100 IR with the Infrared sensor connected to the CM-510.
I use a program like this :

[img]http://www.cutulic.fr/0.jpg

When the U key on the remote control is pressed it should display something.
It nothing happens!
If you have an idea thank you.
[/img][/code]
Hi,
Il am a beginner un robotic...
Here is my problem:
I try to use the RC-100 IR with the Infrared sensor connected to the CM-510.
I use a program like this :

[img]http://www.cutulic.fr/0.jpg

When the U key on the remote control is pressed it should display something.
It nothing happens!
If you have an idea thank you.
[/img][/code]
ctlc2
Newbie
Newbie
Posts: 2
Joined: Mon Apr 23, 2012 5:00 pm
Top

Post by hugobiwan » Sat Aug 18, 2012 9:33 am

Post by hugobiwan
Sat Aug 18, 2012 9:33 am

Be sure to unplug the usb2dynamixel from the robot before switcthing on the RC100 and begin your tests.

Best regards.
@hugobiwan
Be sure to unplug the usb2dynamixel from the robot before switcthing on the RC100 and begin your tests.

Best regards.
@hugobiwan
hugobiwan
Savvy Roboteer
Savvy Roboteer
Posts: 27
Joined: Sat Sep 17, 2011 11:29 pm
Top

Post by ctlc2 » Sat Aug 18, 2012 12:01 pm

Post by ctlc2
Sat Aug 18, 2012 12:01 pm

Merci mille fois
c'était tout bête....

:oops:

In English !
Thank !!!
Merci mille fois
c'était tout bête....

:oops:

In English !
Thank !!!
ctlc2
Newbie
Newbie
Posts: 2
Joined: Mon Apr 23, 2012 5:00 pm
Top

Post by hugobiwan » Sat Aug 18, 2012 7:28 pm

Post by hugobiwan
Sat Aug 18, 2012 7:28 pm

Je t'en prie :-)
C'est agréable de savoir que cela a marché :-)

Cordialement,

@hugobiwan
Je t'en prie :-)
C'est agréable de savoir que cela a marché :-)

Cordialement,

@hugobiwan
hugobiwan
Savvy Roboteer
Savvy Roboteer
Posts: 27
Joined: Sat Sep 17, 2011 11:29 pm
Top

4 posts • Page 1 of 1
Post a reply
4 posts • Page 1 of 1
Return to Bioloid & Robotis