AX18 Servo timing
AX18 Servo timing
by FriedV
Thu Nov 15, 2012 6:09 pm
So, the AX18 is supposed to do 97rpm at full speed.
This means in 1 min Ax18 can make 360*97 deg per minute.
That means 6*97 = deg per second.
That would yield to 1/(6*97)~ 1.72msec/deg.
So a servo turn of 45° should take 77 msec.
Is this right?
Friedrich
This means in 1 min Ax18 can make 360*97 deg per minute.
That means 6*97 = deg per second.
That would yield to 1/(6*97)~ 1.72msec/deg.
So a servo turn of 45° should take 77 msec.
Is this right?
Friedrich
